Stainless steel cable guardrail system with cheap price
|Max Centres||2000mm||stainless steel finish||satin or mirror|
|stainless steel grade||sus304/sus316||rod bar option||¢8mm,¢12mm|
|Post dimensions||¢38mm,¢50.8mm,¢38*38mm,¢50*50mm||Base paltes||100mm with base cover|
|Post measurements||made to measure(Price vary)||Post constraction||welded to base plate&tube support to top|
|Post wall thickness||1.2mm,1.35mm.1.5mm.2.0mm||Install||DIY|
|Handrail||Handrail have vary option from solid wood,PVC, stainless steel||Post shape||On request|
What can we do for you?
4:Price Match Guarantee
How to Measure up your Balustrade?
1:Get out your sketchpad and draw a bird's eye view of the area
where you want the balustrade to be placed;
2:You can either draw all corner and end posts onto your sketch. Or
alternatively measure the outside edge of the area.
3:Now that your end and corner posts are drawn or your outside
measurements taken, insert the distances on your drawing.
4:With your measurements to hand you can now send in your drawings
What are you fixing your system to?
When deciding on whether to buy and install a balustrade system it
is essential that the system is fited to a solid fixture ground.
This includes ood such as composite decking, metal, brick or
concrete. If this is not the case we cannot be held liable for the
system being structurally unsound.
The type of ground or wall your fitting o will affect what fixtures
you require. Find bew typical examples;
Wood: Coach screws or Coach Bolts
METAL Screws, Nuts & Bolts, Drill & Tap steel or Bolt straight
BRICK/ CONCRETE Anchor bolts, Thunder bolts or Threaded bar and resin.
These fixings ae purely a guide and are not suitable for every
DO NOT ARRANGE FOR INSTALLERS UNTIL ALL YOUR ITEMS HAVE ARRIVED AND
BEEN THOROUGHLY CHECKED.
How to install your glass balustrade?
Below are typical examples of fixing methods. These my not be
suitable for your installation
WOOD drill 6mm pilot hole 80mm, use M8 x 100mm stainless steel coach
METAL drill and tap M8, use M8 x 50 stainless steel bolts with locking
BRICK/CONCRETE drill 8mm holes to depth of 80mm, use M8 x 100mm stainless steel
floor anchor fixing
1:Once you have positioned your post and inserted your fixings,
tighen them hand tight Now check your post for 2:plumb and level.
Hold the spirit level where the glass would run as well as at the
front and back of the posts. 3:Shim as necessary till the post is
level. Once done please repeat this with all other posts.
How do we pack ?
Well wrapped up in EPE foam in a Carton, and then put it in Sealed plywood crates
Our Factory and Showroom:
Our advantage is as below:
1. We are a real manufacturer, not trading company, with
2. Professional design team, will make proper suggestion for all
project drawing to control or lessen purchase cost.
3. Offer oversea take meamsurement and installation service, solve
all your skill problems.
4. With German processing machine to ensure polish quality
5. All of our products meet material test standard from
ASTM,BS2026,CE and DIN/EN 12600
6. More than 7000m2 size factory, with professional manufacturer
We are a more than 15 years manufacture up to now, below is some
projects we did before, share with you, any model you like.